ARAI TOUR-X 5 MOTORCYCLE HELMET
It is time for a new adventure with the all-new Tour-X5! It’s time to ride the earth!
The Tour-X5 is a completely redesigned helmet, packed with many new features. As with everything from Arai, every improvement is made with a priority for protection. And this new model brings us ever closer to the ideal Arai shape for protection.
One of the biggest changes is the visor system and its visor. The new VAS-A visor system, derived from the VAS-V system developed for the RX-7V, has been designed to maximize Glancing-Off performance, meaning more surface area to glance off impact energy whilst offering easy installation and removal of the visor and peak. The visor itself has been redesigned for increased visibility and Glancing-Off performance, and is now a Max Vision visor, so a Pinlock insert can easily be installed. The new VAS-A visor system also makes it easier to switch, without tools, to one of the other styles. You can choose between Adventure, Off-road and On-road.
Other improvements include a completely new ventilation system. The ventilation system of the Tour-X5 is the second model to feature the 3D logo duct, previously introduced on the Quantic. Complemented by the new AR Spoiler and the latest iteration of the Delta Duct, the Delta Duct 6, the Tour-X5 also features a completely new chin vent. The ventilation system of the Tour-X5 will have ample air flow to keep you cool no matter what, so don't sweat it. Additionally, the inner vent gate can flow air to the mouth or visor for increased defogging. As with any Arai model, ventilation parts like the 3D Logo Duct, AR Spoiler and Delta Duct 6 are made to break off during an impact for maximum Glancing Off performance.
On the inside, the interior is fully removable, with an adjustable pad at the rear of the crown pad. A redesigned nose deflector will make the use of goggles easy. FCS cheek pads will give a firm fit both on- and off-road.
- New VAS-A visor system designed to maximize Glancing-Off Performance
- Adventure, Off-road, and On-road possibilities
- Enhanced 5mm wider on each side chin bar for easy on/off comfort
- New forehead logo duct for excellent ventilation
- Flat spot-on side of the shell for easy communication device installation
Specification
Outer Shell: PB-CLC2
Arai’s Peripherally Belted Complex Laminate Construction greatly increases shell strength and flexibility while maintaining low weight and a lower centre of gravity. Positioned across the top of the eye port, this band contributes to the use of a thinner EPS liner which greatly enhances the upward field of view. A specially designed “mechanically expanded fibre mat”, sandwiched between the inner and outer layers of Arai’s proprietary Super Fibre Laminates, is used to reinforce and bond these two Super Fibre layers without adding significant weight to the helmet. The latest “Z-Mixture” resins increases material adhesion requiring less resin for a stronger bond between materials for a thinner and lighter shell.
Variable Axis System A (VAS-A)
This new visor system allows for easier and faster visor swaps. The visor can be attached or removed without the need for any tools. The peak utilizes only one screw on each side for easy removal & installation. With VAS, the visor mounting position is lowered, yielding an average of an additional 10mm of smoother shell across both temple areas, in pursuit of the ideal smoother shape that increases the ability to glance off impact energy. The visor is designed to follow the line of the eye-opening area on the shell while keeping a continuous curvature. A larger, clearer field-of-view is the result. The visor radius follows the shape of the helmet, providing a higher level of glancing off ability.
3 Configurations
Multi-purpose styles for your ride: adventure, on-road, and off-road. Changing to either of the styles does not require additional parts. A more open eye-port is optimized for wearing goggles.
Tour-X5 Ventilation
The Tour-X5 has a completely new ventilation system. With a total of three intake vents and five exhaust vents, the ventilation is further improved from the previous generation. Stay cool in any situation.
3D Arai logo duct
Immediately noticeable, the new 3D Arai logo duct (made as thin as possible, just 3.5mm in depth) feeds two central 10mm intake ports underneath. This is a first in an Arai, and entirely due to the PB-CLC2 shell’s strength and construction. It also works very well at low speed and with an upright riding position. At just 50km/h it’s channelling an extra 40% airflow, at 120km/h 7% compared to without. It can also be opened, or closed, easily with summer or winter gloves via a short-stroke lever placed at the top. If the rider can’t see the lever and the logo is in its normal place, the duct is open. The Arai logo duct is designed to breakaway in the event of an impact for enhanced glancing off ability.
Inner chin (bar) vent shutter
Working in conjunction with the mouth shutter, the inner shutter allows you to adjust the amount of airflow entering the helmet. If the inner and outer shutters are both open, the air will be directed towards your mouth. If the outer shutter is open and the inner closed, the air will be directed towards the visor and help to reduce fogging.
Three position chin vent
Three-position chin vent helps in demisting the visor and offering fresh, cool air to the rider.
Neck exhaust vent
To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet.
Rear Duct
The air-through top-rear-duct center brace also functions as a goggle-strap locator. The diffusers can be removed or replaced quickly and easily by removing a single screw on the rear-duct center brace.
Side exhausts
Producing low pressure behind the rear vent for better hot air extraction, these side exhaust ports are integrated in the shell for better aerodynamics, wind noise reduction, and prevention of buffeting at speed. On the inside, a small noise reducing foam helps to absorb and diminish excessive noise, without reducing ventilation performance.
Retractable Pull-down Chin Spoiler
The retractable pull-down spoiler reduces wind intrusion into the bottom of the helmet and helps to pull out hot and humid air around the sculpted leading edges of the cheek pads. This coordinated ventilation, combined with fresh air coming in from the chin vent, also helps to reduce visor fogging and wind noise.
Pinlock insert lens
Effectively prevents misting and fogging of the visor, even under extreme wet and damp conditions. May be cleaned and changed easily.
Dry-Cool® Liner
Arai´s Dry-Cool® material transfers heat and moisture away from the rider quickly and efficiently.
Replaceable Cheek pads/Ear cups
Cheek pads/ear cups may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning, blot dry with a towel and let air dry completely before reassembly. Never machine wash or use heat to dry. Interior parts in different size thickness are available for a custom fit for every rider.
Remove by taking the frontside out first
Place back by inserting the backside first
Replaceable Interior
The complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.
Replaceable Chinstrap covers
All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.
Facial Contour System (FCS)
To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure.
5mm ’’Peel Away’’ Ear cups/Cheek pads
Giving even more ability to craft the perfect fit and comfort, the cheek pads feature a 5 mm peel away layer for added room if needed.
10 mm wider base
The exclusive shell flares 5mm on each side for a total of 10mm around the base, making it easier to get the helmet on and off.
Egg-shaped Chin Cover Compatible
Attached to the bottom of the helmet, the chin curtain helps to further accentuate the Egg-shape form. The curtain simultaneously blocks air intrusion from turbulent air below and increases negative pressure to enhance the exhaust function of FFS by drawing more air from the mouth area. The improved airflow reduces noise even further.
Emergency Release System (ERS)
Allows easier access to an injured rider. By pulling the orange tabs integrated in the pads, the cheek pads slide out. Making helmet removal easier for trained medical personnel and rescuers. Minimising the risk of additional injury.
Dirt removal
The elongated and rounded peak helps protect the rider from mud or other objects. The flow-through vent ducts and removable rear vent cowls also allow you to remove dirt easily.
5-year limited warranty
All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture.
All-day comfort
All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai.
Arai In-house Test
Arai helmets are designed to meet the stringent Arai In-house criteria, in addition to the mandatory ECE standard.
ECE R22-06 requires a much more stringent testing process than the previous ECE R22-05 and includes an oblique test to measure rotation.
