PJ1 Paints 16-HIT Fast Black Hi-Temp Exhaust  £13.99

PJ1 Paints 16-HIT Fast Black Hi-Temp Exhaust

PJ1 FAST BLACK HI-TEMP EXHAUST PAINT PJ1 Exhaust Paint (H) is a matt Black Exhaust Paint designed to exceed 1200f (650C) 400ml. originally formulated for NASA for use on reentry spacecraft. As a silica-ceramic hybrid, it moves with the metal as it heats/expands and cools/contracts to give it durability. PJ1 Exhaust Paint forms a protective shield against rust and corrosion. It resists chipping and scratching.

PJ1 Fast Black special black finishes flat black has been reformulated to meet the revised European Safety Standards.

PJ1 Fast Black Flat Black High Temperature Exhaust System Paint gives a matt black finish and is best sprayed onto a smooth grease free surface.

PJ1 advise that the exhaust should be warmed up to allow the good adhesion and to allow the paint to flow correctly.

Aerosol 400ml x 1 Code: 9000-PJ1-EU16HIT
Note: Aerosol's Cannot Be Shippied By Air Please Choose The Road Service If Ordering From Outside The UK Or Ireland

Application Instructions:

• Blast etch or sand to expose bare metal.
• Remove all loose debris.
• Flush surface with non residue evaporative cleaner such as PJ1 Super Cleaner (Product Number 3-20, 3-21(CA Compliant))
• Apply paint within 24 hours.
• Shake can vigorously for a full minute. Apply 3 or 4 thin even coats. Shake can between coats. More thin coats are better than fewer thick coats.

• Run at idle for 10 minutes.
• Cool for 20 minutes.
• Run at idle for 20 minutes.
• Cool for 20 minutes.

• Let paint dry completely.
• Let paint dry completely.
• Heat to 250F/121C for 30 minutes.
• Cool for 30 minutes.
• Heat to 400F/204C for 30 minutes.
• Cool for 30 minutes. Heat to 650F/343C for 30 minutes.